Outback-power-systems VFX Series Programming Manual Manual de usuario descargar pdf (Pagina 25)

3. OutBack Series

• 2-10 FXs are wired to two 120VAC output legs producing 240 VAC between them.

• This system requires an FW-X240 or PSX-240 Auto Transformer.

• 240VAC can be produced on one leg if the load is ten amps or less; an FX on one leg can power

loads on the other leg, helping to balance loads.

• The AC input source (generator or grid) must be 240VAC between both legs.

4. OutBack Series/Parallel

• Unique to OutBack, the loads are balanced between two 120VAC legs, changing between series and

parallel as needed.

• An FW-X240 or PSX-240 Auto Transformer is required to balance the loads.

• This system allows for larger AC loads without overloading either of the FX 120 VAC outputs; it also

allows for 240 split-phase using only one FX.

3 kW 120 VAC

6 kW

120 VAC

Leg 2

LOAD

6 kW

120 VAC

Leg 1

3 kW 120 VAC

12 kW

240 VAC

Leg 1

and

Leg 2

3 kW 120 VAC

X-240

3 kW 120 VAC

LOAD

6 kW

240 VAC

Leg 1

and

Leg 2

3 kW

120 VAC

Leg 2

3 kW

120 VAC

Leg 1

X-240

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 58 59

Sin comentarios

Outback-power-systems VFX Series Programming Manual Manual de usuario Pagina 25