Outback-power-systems MATE2M System Controller and Display Installation Manual de usuario Pagina 4

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 39
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 3
1.0 Introduction
The OutBack MATE2M is a complete system controller and display for the OutBack FX inverter/charger. It provides a display
of the operation as well as allows for control and adjustment of the product setpoints. The OutBack MATE2M also coordinates
the operation of the entire inverter / charger system to maximize the performance and to prevent multiple products from
conflicting.
Through the use of an OutBack HUB communication manager a single OutBack MATE2M is able to connect to multiple FX
inverter/chargers and other OutBack products. A maximum of ten OutBack products will be able to be connected to a single
MATE2M via a HUB using CAT 5 type Ethernet cabling with 8 wire RJ45 modular connectors.
1.1 Features
INVERTER LED
INVERTER
BUTTON
FOUR “SOFT”
BUTTONS
4 by 20 character
backlit display
AC INPUT LED
AC INPUT
BUTTON
LCD Display
Four line, 80 character backlit LCD display with alphanumeric and graphic displays
Control Keypad
Six backlit silicone membrane keys – dedicated Inverter and AC input “hot” keys for control & 4 soft keys
Status Indicators
Two LED indicators: Green = Inverter status Yellow = AC Input status
Communication Protocol
Proprietary OutBack Multi-drop network using the OutBack HUB.
Interconnecting Cable
Standard CAT 5 PC network cable with RJ45 modular connectors / wired as non-crossover
Maximum Cable Length
The maximum distance that has been tested is 1000 feet of cable in an office / commercial building with success.
Optional PC computer interface
RS232 Opto-Isolated DB9 serial communication port
MATE2M System Controller and Display User Manual Copyright 2003 © OutBack Power Systems, Inc.
19009 62
nd
Ave NE, Arlington WA 98223 USA
Page 4 Rev 1.00 03/31/04 Tel 360 435 6030 Fax 360 435 6019
Vista de pagina 3
1 2 3 4 5 6 7 8 9 ... 38 39

Comentarios a estos manuales

Sin comentarios