Outback-power-systems FLEXnet DC Users Guide Manual de usuario descargar pdf (Pagina 19)

DC BAT 12.5V 99%

Bat -0.6A 0.000kW

Net -4AH 00.7kWH

Days Since Full 4.8

The fourth SUM screen shows:

• Battery voltage

• The current state-of-charge

• Battery readings show the instantaneous amp, amp hour,

kilowatt, and kilowatt hour  gures. When comparing the

amp hours reading to “FULL,” the  gure is charge factor

compensated.

• The number of days since the battery last met the charge

parameters.

Press the  rst soft key to return to the MAIN screen.

Press the <STATUS> soft key to open the STATUS screen to view

the status of either the FX, Charge Controller, or (FLEXnet) DC

MAIN------------------------------

11:30:55A

SUM STATUS SETUP ADV

Press the <DC> soft key to view the status of the (FlexNet) DC

STATUS

choose device:

FX CC DC MAIN

Press the <METER> soft key to view the (FlexNet) DC meter

readings.

STATUS/DC/PAGE1 --------------

STATS

METER SHUNT BATT TOP

From the MAIN menu, press the <SUM> soft key to view a

summary of the system’s operation. This information is a sum

of all FlexNet DC data. Press the second soft key to view the

next SUM screen

FX Total 12.6V 99%

Inverting 0.000kW

AC Loads 0.000kW

Buying $ 0.000kW

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 33 34

Sin comentarios

Outback-power-systems FLEXnet DC Users Guide Manual de usuario Pagina 19