Outback-power-systems VFX Series International Programming Manual Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 56
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
26
Once the MATE recognizes each FX (and OutBack Charge Controller), push and hold the  rst two soft
keys simultaneously to return to the MAIN menu. To program the FXs, go to the ADV/FX/STACK menu
on the MATE navigating with the following steps:
Press the <ADV> soft key.
NOTE: Pressing and holding the  rst two soft keys
at the same time will always bring up the Main
Menu screen.
Push any soft key on the ADV/SETTINGS/
WARNING screen and go to the ADV/PASSWORD
screen.
MAIN--------------------------
12:12:16A
SUM STATUS SETUP ADV
ADV/SETTINGS/WARNING
changes made could
adversely a ect
system performance
PROGRAMMING THE FXS
The screen displays 132. Press the <INC>
button until it scrolls to the password 141.
ADV/PASSWORD---------------
enter the password
132
ENTER INC DEC EXIT
ADV/PASSWORD----------------
enter the password
141
ENTER INC DEC EXIT
Push the <ENTER> soft key.
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 55 56

Comentarios a estos manuales

Sin comentarios