Outback-power-systems MATE2 System Controller and Display Installation a Manual de usuario descargar pdf (Pagina 64)

HBX Mode:

• Standsforhigh battery transfer

• Isusedwithgrid-connectedFXSeriesInverter/ChargersthathaveutilitypowerastheirAC

input

• Isamodeprimarilyusedinapplicationsthathaveenoughrenewableenergy(RE)power

production to meet the needs of the loads most of the time

• AllowstheFXtoconnecttoanACsourceifthebatteryvoltagehasfallenbelowaprogram-

mablesetpointforausercongurableamountoftime(MATEwillthenallowtheFXto

remain connected to the AC source until the battery voltage has risen above a second set

pointforaprogrammableamountoftime)

e MATE detects when the battery is truly low and needs charging as opposed to a sudden

andmomentarydropcausedbyasizabledemandforpowerfromadevicesuchasamotor.

Atthesetimes,theMATEdirectstheFXtouseACpoweruntilthebatteryisfullycharged

again. e user programs in the amount of time a battery can be below the low voltage and

theamountoftimeaerit’sfullychargedbeforetheMATEstartsissuingitscommands.e

MATE uses these times to switch back and forth between AC and battery power. Additionally,

inHBXmode,theFXchargingfunctioncanbeshutotoallowthealternativeenergysource

to recharge the batteries while the loads are powered by the utility grid.

MAIN-----------------------------------

8:25:04A

SUM STATUS SETUP ADV

ADV/PASSWORD---------------

enter the password

132

ENTER INC DEC EXIT

ADV/SETTINGS/WARNING

changes made could

adversely affect

system performance

ADV----------------------------------

choose a product:

FX CC DC MATE

ADV/MATE/HBX-------------------

hbx-use 24.0 vdc

griduse point

DOWN ADV INC DEC

ADV/MATE/PG1--------------------

choose category

HBX GRIDUSE AGS PG2

Press <INC>until141,thenpressenter

ADV/MATE/HBX --------------------

hbx-use 01.0 hrs

grid delay

DOWN UP INC DEC

ADV/MATE/HBX -------------------

hbx-drop 01.0 hrs

grid delay

DOWN UP INC DEC

ADV/MATE/HBX --------------------

hbx-drop 26.0 vdc

grid setpoint

DOWN UP INC DEC

ADV/MATE/HBX ---------------------

end of HBX menu

UP TOP ADV

Press <INC> and <DEC> so

keys as needed to change set

points

ADV/MATE/HBX ---------------------

ac input

control

DOWN UP CHANGE

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 131 132

Comentarios a estos manuales

Sin comentarios

Outback-power-systems MATE2 System Controller and Display Installation a Manual de usuario Pagina 64

Comentarios a estos manuales

Relacionado con productos y manuales para Proveedores De Energía Outback-power-systems MATE2 System Controller and Display Installation a